I achieved that I made a spare pedal for my KSR. It is a brake pedal and a shift pedal. Its bearing adhered in "Loctite for fit use". The knob of the tip welds it.
Thursday, April 24, 2008
Spare Pedal
2008/4/24
I achieved that I made a spare pedal for my KSR. It is a brake pedal and a shift pedal. Its bearing adhered in "Loctite for fit use". The knob of the tip welds it.
I achieved that I made a spare pedal for my KSR. It is a brake pedal and a shift pedal. Its bearing adhered in "Loctite for fit use". The knob of the tip welds it.
Wednesday, April 23, 2008
Cowl fiting
2008/4/23
Naochi and Atubomb came to my garage.
It is continuation yesterday and today for two days.
Naochi stimulates work to install an engine of the Sonic Of Thai Honda in NSR50.
He cut the part which the FRP cowl hit today yesterday. Because engines to install are different, naturally the part appearing than the cause hits it. The method that he does. It puts a marking gauge with a magic pen and cuts it in a hand grinder. As for the work, fiberglass is itchy.
He completed the installation of the headlight.
A good pace. He dotes on N5, but will be a reason?
Naochi and Atubomb came to my garage.
It is continuation yesterday and today for two days.
Naochi stimulates work to install an engine of the Sonic Of Thai Honda in NSR50.
He cut the part which the FRP cowl hit today yesterday. Because engines to install are different, naturally the part appearing than the cause hits it. The method that he does. It puts a marking gauge with a magic pen and cuts it in a hand grinder. As for the work, fiberglass is itchy.
He completed the installation of the headlight.
A good pace. He dotes on N5, but will be a reason?
Go hospital
2008/4/23
Please input the sentence that I want to translate here. The input language is judged automatically. I took the paid vacation to go to the Nippon Steel Hirohata Hospital and did it yesterday.
When I made an accident, I hit the right foot in the ground. Even if there passes for half a year, I have a pain in it very. I had a hospital inspect it in detail.
I had a doctor take the slice of the foot by MRI. There is no abnormality except that "rear cross ligament" is damaged. My half moon board and other ligaments were saved.
There is stiffness there when I hang tension to my Inside Subligament because I have a pain in it and seems to hit a nerve. I had a doctor paralyze a nerve over there by a little anesthesia. Then a part was settled because a pain was gone.
A cause was not settled for these past two months, and it was a big crop that a cause was settled because there was the doubt of the half moon board injury not to heal.
Then, it went down, and I went for MFJ license and a monkey in Mechbox. When I made an accident, the motorcycle did a ride. Mechbox is a motorcycle shop. Because the uncle hurt ligament, you might stick to ligament and were able to talk.
I went home. Atsubon and Naochi came to the shed and played with one's motorcycle with a rustling sound.
I made a spare shift pedal and brake pedal of KSR.
Please input the sentence that I want to translate here. The input language is judged automatically. I took the paid vacation to go to the Nippon Steel Hirohata Hospital and did it yesterday.
When I made an accident, I hit the right foot in the ground. Even if there passes for half a year, I have a pain in it very. I had a hospital inspect it in detail.
I had a doctor take the slice of the foot by MRI. There is no abnormality except that "rear cross ligament" is damaged. My half moon board and other ligaments were saved.
There is stiffness there when I hang tension to my Inside Subligament because I have a pain in it and seems to hit a nerve. I had a doctor paralyze a nerve over there by a little anesthesia. Then a part was settled because a pain was gone.
A cause was not settled for these past two months, and it was a big crop that a cause was settled because there was the doubt of the half moon board injury not to heal.
Then, it went down, and I went for MFJ license and a monkey in Mechbox. When I made an accident, the motorcycle did a ride. Mechbox is a motorcycle shop. Because the uncle hurt ligament, you might stick to ligament and were able to talk.
I made a spare shift pedal and brake pedal of KSR.
Confession
2008/4/23
I have leaked liquid-poo this Sunday.
It was angry at mother very much and washed underwear silently.
I have leaked liquid-poo this Sunday.
It was angry at mother very much and washed underwear silently.
Tuesday, April 22, 2008
Naochi's N5's shift link rod
2008/4/22
When I came home, there was Naochi. He made a shift link rod of N5.
He uses the NC lathe in his company. Therefore he processed it by a high turn without a hesitation.
The hand-operated lathe cannot raise a turn. Therefore, the slow away finish is bad.The point of a sword is tipped, and the throw away is the type that I can change. It is used by a mass production mainly.
Therefore you must use the byte (blade) of the hand grind to get the clean finish by a low turn.
Mostly I comply at this time using the throw away.
Because I had the left dice by chance, Naochi cut a screw using it.
I use normal of N5 other than a link rod.
When it was completed, Naochi operated a noisy cricket many times.
And he said. "This is 5 speed. It has decreased than an original engine. "
When I came home, there was Naochi. He made a shift link rod of N5.
He uses the NC lathe in his company. Therefore he processed it by a high turn without a hesitation.
The hand-operated lathe cannot raise a turn. Therefore, the slow away finish is bad.The point of a sword is tipped, and the throw away is the type that I can change. It is used by a mass production mainly.
Therefore you must use the byte (blade) of the hand grind to get the clean finish by a low turn.
Mostly I comply at this time using the throw away.
Because I had the left dice by chance, Naochi cut a screw using it.
I use normal of N5 other than a link rod.
When it was completed, Naochi operated a noisy cricket many times.
And he said. "This is 5 speed. It has decreased than an original engine. "
An identification of acceptance arrives
2008/4/22
An identification of acceptance of Minimax reached my house.
I attached a cowl for races to my KSR. It is after a long absence.
I will be absent from a company tomorrow to go for a medical examination of the right foot which I hit on the ground in a traffic accident. Then, I make the pedal of the spare after having come back to the house and want to do trivial routine duties.
An identification of acceptance of Minimax reached my house.
I attached a cowl for races to my KSR. It is after a long absence.
I will be absent from a company tomorrow to go for a medical examination of the right foot which I hit on the ground in a traffic accident. Then, I make the pedal of the spare after having come back to the house and want to do trivial routine duties.
Sunday, April 20, 2008
For last adjustment to a Capital Sports Land
2008/4/20
Because spiral flannel was too big, it interfered a cowl. I changed it for a common thing.
We went to Capital Sports Land to coordinate it with the setting of the PE22 cab.
Because I changed a camshaft for a low profile cam, it turned around properly to the top. However, it is to 11000rpm whereas FCR turns around to 14000rpm. It will be so.
Because I ran a lot, as for me, a handle was worn-out.
We go until " Auto Police Ccircuit" of Oita late next week!
The update of "the MFJ license" of Shishido seems to be enough tightly, too. We wait for a race.
Because spiral flannel was too big, it interfered a cowl. I changed it for a common thing.
We went to Capital Sports Land to coordinate it with the setting of the PE22 cab.
Because I changed a camshaft for a low profile cam, it turned around properly to the top. However, it is to 11000rpm whereas FCR turns around to 14000rpm. It will be so.
Because I ran a lot, as for me, a handle was worn-out.
The update of "the MFJ license" of Shishido seems to be enough tightly, too. We wait for a race.
Subscribe to:
Posts (Atom)