Naochi's N5 fairing fiting.

2008/4/20
We came home from a capital. Naochi did work of N5. It considerably advanced.
He bought a new fairing and attached it. It is way of buying like adult.
A muffler seems to butt against a step. You must weld it to avoid a step.

I was ready to participate in MINIMAX performed in Oita.

2008/4/17
KAWASAKI KSR110
I assembled the knob of a shift pedal and the brake pedal. A screw depended on it and was accompanied. However, I welded it because I often fell off.

I made it from an aluminum hexagon stick this time. But my recommendation is pedal rubber of Honda. It is cheap for 100 yen. The appearance resembles stock, too.
I made the part which we such as step bars produced, and steps were completed.
It is clear to be handmade even if anyone watches it.

The fan flannel of the cab chose maid in Thailand as always. According to the thought of the maker, wave form seems to make a swirl.
I decided to bet it on the thought.
However, I bought that of normal form. It is a spare. When it arrived, I was surprised. It was the same maker.

I looked for it afterwards for around one hour because a catch tank of oil and the gasoline was missing. It was found. And I attached them.
I have already finished preparations. I do that I usually work strictly to the limit.
Such a thing is the first time. There is another one week until a race begins. What should I do until a race?

Naochi's N5

2008/4/17
Naochi came weekdays. This is rare.
Naochi listed things to order with a part of N5 producing.
The front view of this motorcycle looks just like my KSR.

I like crabs of Brembo in brakes caliper. Therefore I suggested to Naochi to attach it. It is early that the caliper of the facing piston loses brakes power after separating a lever in comparison with a pin slide. I like it.
I feel in particular that the action becomes the car conspicuously. It is one of the reasons why I ride a VW Beetle.
However, I repair it all the time recently. Therefore I cannot but get into a light truck.
When brakes of the cars are facing pistons, and there is not a master background, it can get a reply at the same level as a motorcycle.

KSR110 step bar completion.and Atsubon.

2008/4/16
I made a cap made by plastic with a lathe. I hammered it in into a step bar. Then a step bar was completed. I made one spare.
When I make round form, I make a tool bit the same form.
The NC machine makes round form by biaxially moving it at the same time. However, a round tool bit is necessary for the hand-operated machine.
When I process plastic. It posts oil in what is soft and sharpens it by a high turn.

Because radio control of Atsubon broke down, he repaired it. Probably the volume of the controller is bad. Because there was the thing which I bought when I made an audio system, I gave him it.

Because he was bigger than a slightly genuine part, possessed it without a hesitation, and, as for it, he opened a hole with a drill. He is brave not to be able to put it back.
He was able to repair it properly.

I participate in a bug dash on Sunday

2008/4/14
It was that there was the event of the drag race of the gene ooh that a bug dash said in Okayama farm road pad and performed it. The repair of the Oval wind reached by light truck after all because I was not in time!

I watched it relaxedly while eating a hot dock with the friend who lived in Hiroshima by the event that I did faintly.
There was it and looked and died out, and there was the fast car.
Then, I went to the motorcycle shop which was good at body work. The location is Okayama. I had the person of the shop show the photograph of the custom motorcycle.
Because I understood it by the repair of the Oval wind well, the hotness of the welding thought that I was great and was good.

Harley has parts almost as same as Honda monkey.
There is the crankcase of the billet.

Naochi came when I came back to the house. Naochi installed an engine of the Thai Honda sonic in the body in NSR50.
I said that a radiator hit a tire. I sent all the radiators in my house and chose you. I adopted the guy who did not know what you were assigned to after all.

I made a step with a knurl. A photograph is the knurl. I push a notched roller to the processing thing and copy it.

Precision of the lathe

2008/4/14
My lathe which I was used and bought. Precision of the core push is not good enough.
I broken when I used the Tungsten alloy drill.
I measured quantity of abrasion of the slide part. It decreased by 0.02 millimeters.
I want to repair it.
Should I serve brass by brazing?
Or produce the next-generation hand-operated lathe that I always work out a design; or ...
I cannot process straight a thin hole.

I was busy on Saturday

2008/4/14
Tatsumi of my friend wanted to make the work which shined.
I decided to cooperate.
I made use of the experience of the engineer and produced an irregularity on and off light device. I used the machine and I was plain and did it when I used the microcomputer because I was hard to adjust it on the site.

This photograph is a production process.

 I cut an aluminum board by a saw.



It processes a tap hole and an end face in a milling machine.

Of course I remodel this milling machine.

I use the inverter to turn a motor. I add no stage shifting, a reversal.

It cuts it in 200rpm in the case of the tap.

I worked from morning, and an on and off light device of Tatsumi was completed at around 4:00 p.m.
It is the structure which a relay acts on when a motor turns and shuts out the photoelectric sensor. I can change the rotary speed of the motor freely.

I seem to give this work in Kokuten what.
Kokuten is an exhibition of the authoritative art.
May exhibit such a playful thing in Kokuten; ...?