SR400 rear tire exchange.

We have replaced the rear tire of Naoyan's SR400.
This bike was once his ride, when in high school.

We will continue to use the valve cap.

This tire has too scuffing. It has reached the cloth.

We were working with me and Naoyan, 2 people.

Uncle are close to each other.

I showed off a finger power.

Oh Jesus.
When fitting the tire, it was allowed to puncture the tube. It is a tragedy.
It's no use crying over spilt milk.

...
After a few tens of seconds of silence,

We remove the tire, it confirmed the tube.
It was impossible to repair. Hole is too large.

We ordered the tube again,
At a later date, re-assembly.
So tragedy was ceased.

Tubeless reduction with OUTEX kit, The 17-inch RH03J type SR400

I prior to the centering of the wheel, was the replacement of the bearings.
The bearing was not bad even without replacement. But, it is incidentally that was disassembled.

I After removing the oil seal, was welded steel bars. This clamp for temporary fixing.

I have to fix the grounding of welding at the brake bolt hole.

The rod of steel is stuck with welding, you can remove it and hit it from the opposite.

You had better remove the rubber seal of the bearing.You can well welding.

You remove the one side, the opposite can be hammering.It easily removed.
Once you get in both sides of the bearing to push hit the new bearings.
If once you hit just the inner race, ball spoil.
Outer race or the whole, it hits.

State of press-fitting the bearing.
Bearing of part number
6303LLU C3 Quantity 2
Bearing is not a genuine parts. Made NTN.
Oil seal
93106-28023 Quantity 1
93105-45017 Quantity 1

I did a centering after this.

It will tubeless reduction with OUTEX tubeless kit.

Completion Once fit the tire.

Front tires
110 / 70R Dunlop α-13 SPORTMAX
Part number 304 541

Incidentally rim width 3.00
I did a rotor bolt with a new one. Part number 90111-08003 six
Front tire does not particularly interfere with the body.

I was able to sell to Naoyan it between Bon vacation, front tire that was removed from this RH03J.
I was exchanged also the wheel in the new bearings.

I was remodeling it to 17 inches, the SR400 of RH03J type.

I was such a thing to one months ago.
August 14 to 16 in Japan is the Obon holiday.

I single in the past, was remodeled SR500 to 17 inches.
It cornering is good. I can rub the step with confidence.
So I had to buy a rim and the hub.

Rim width of the front is 3.00.
Webike is good to order it. It's easy because there is an input form.

You can choose the color, the four colors of gold,silver, black and blue.

Now, I have a SR400 type of RH03J.
I decided to bestow the "Naoyan" to that of the front around. "Naoyan" is my friend.
Assuming there is no wheel.

So I decided to assemble the 17 inches wheels, during the Obon holiday.
RH03J is this type ↓ is the current fuel injection.

This wheel hub's rusty second-hand goods. I bought at the auction site. Sandblast it, and paint.
RH01J later hub's common. So it has in abundance.

SR's originally 18 inches.Spoke are too long, for 17 inches wheels.
So I will use Nexxs made of spokes, the part number SPF-Y02.

The spokes set of Nexxs contains two types of spokes.
They are entered in each bag that says outer and inner. Length is different.

However, they are not separated on the inside of the hole and outside the hole.
In fact it is the lights and left.
Short spoke to the disk side
Long spokes on the opposite side
I wrote a line with magic pen, in order to not confuse. I think you are faintly visible.

The front wheel is temporarily fixed all spoke by twist tie, before fitting to the rim.
In this way it will be temporarily fixed all of the spokes. However, this image is not knitted by mistake.

Knitting is this.
Four beyond the spoke and cross.
At that time, it is above the outside of the hole.

And I make the centering.

Runout is OK when I become a 1mm or less.
Since the rim and spokes new, it's easy. Deviation is less, from the beginning.

Until spoke is good tension, you will continue to tighten each a little while watching the deviation.

When the wheel is 18 inches to 17 inches, an outer diameter of the tire changes.
So it shifts the value of the speedometer.
This will be resolved by using the meter gear for XJR400.

This is a second-hand goods. I washed with brake cleaner, it was previously put plenty of grease then.
If you buy it with the new article.
Yamaha genuine parts of part number
4HM-25190-00
Price 5389 yen
Next time I'll try to buy a new one. To ascertain to what can be fixed,

Bike he was riding at the time of high school students

Naoyan is revive the SR400.
It is a bike he was riding when a high school student.
It's 20 years ago ...

He had it until now. I'm surprised.

Leak fuel cock,
Clutch lever that his brother was folded to overturning
The cured tire cloth seemed to
Fuel hose, such as plastic
Cab main jet is non-removable by rust
Rust rod rear suspension
Rust front fork
Rusty chain
Apex sprocket
Rust throttle wire
Strengthening clutch wire (However, the grip strength)
...

All exchange.
He bought a several hundreds of thousand yen worth of parts. (Rates secret, to his wife)

Rear suspension --- made Daytona
Cab --- Keihin FCR35
Front fork --- for RH03 (type of injection)

Front fork gave for RH03 I have. It will use it with OH.

This time of SR is front drum brake. It me to update to the disk brake.

By the way, my RH03 front is gone. This I assemble them.

Y's Gear disk kit

17 inches wheels.

Easy maintenance CL72_ Finally it was healed

This was ready to can run.
Finally.
It is completed.

The owner told me, when it is entrusted.
"I want you to be able to run this bike. It does not matter with a minimum of maintenance. Even just changing only the tires and the battery is."

If it was that I had a restore, it deviates from the request contents.
So I was completed in this state.

I'm not doing these.
Fork
Stem
Rear suspension
Engine
Exterior

These I want to be someone doing the owner. While using.



And it does not matter.
My Japanese blog has achieved the feat.

What visitors male 100%! Cant Believe It!

I made plastic model for the first time in a long time. Hasegawa FA02

I made plastic model for the first time in a long time.
Hasegawa FA02
Accessories for movable figure　1/12
Desk and chair in the room

The kit contains these, desk two and chair four.
This is what I will be assembled without any adhesive.

This is not enough reality. Paint it's necessary.
I want on top of the desk!
Ashtray, coffee, notebook PC.

I had put this was completed.
Then, everyone is to destroy the chair. In an effort fold it
I will fix it, every time.
This can not fold!

When Tattsuan came, he was playing with making such as "job interview arrangement".
"Center director. Right's role to take notes." I was saying.
He is rich in imagination.

This company has the other series also. It's like science room desk.
Hasagawa


I remembered.
I previously, there was also that it has bought a plastic model of the machining center.

Fine molds

Easy maintenance CL72_ Side stand fulcrum ordinary screw

Sorry
This photo is camera shake.
I remove the fulcrum screws of the side stand, in order to greasing. Ordinary screws had been used there.

It's a part of stepped screws are used, usually.

Seal of insurance that are affixed to the license plate of the bike "in September 1984".
At the time, it was cumbersome to order genuine parts.

You must go to the dealer. You must be ordered to look at the parts list.It does not reach immediately.

Used parts of the magazine want to sell, want to buy, column or parts exchange meeting.


However, modern if those are simple. There is a mail order and auction site.

Perhaps the owner was replaced by usual screws reluctantly, in those circumstances.

It becomes like this when you use an ordinary screw. ↑
Hole will be worse because it loose easy to rub the threads.

I have produced a color with a lathe.
I fixed it with grease up.

I have replaced the O-ring of the tappet cover.
It was bought at the same time, when I ordered the packing of the carb.

Part number
91302-250-010

This is the O-ring was removed, has become square.
But I would like this.
This is the power of Years.